配资之家歡迎您的到来!

Banner
首頁 > 新聞 > 内容

新聞詳情

News detail

激光配资之家應用于哪些材料?

編輯:博牛宝沪深策略時間:2018-05-19

        小型激光配资之家應用于哪些材料? 中國是一個制造大國,國家發展越来越快,制造业對于小型激光配资之家的需求也越大。我們生活中也會看到很多小型激光配资之家雕刻的産品。今天,为大家盤點幾種常見的材料。

        What materials are used in small laser engraving machines? China is a big manufacturing country, and the country is growing faster and faster, and the demand for small laser engraving machines is increasing. We also see a lot of small laser engraving machines in our lives. Today, take stock of several common materials.

1、亞克力(一種有機玻璃)
       亞克力最常用的行业是在廣告行业。因为其重要可塑性高分子材料,具有較好的透明性、化学穩定性和耐候性、易染色、易加工、外觀優美。對于一些傳統從业者来說为了滿足客户的需求以及降低成本,相對于人工来說使用小型激光配资之家的成本比較低。一般情況下有機玻璃采用背雕方式,也就是說從前面雕刻,後面觀看,这使得成品更具立體感。在背雕時請先将圖形加以鏡像,且雕刻速度要快,功率要低。有機玻璃是比較容易切割的,切割時應使用吹氣裝置,以提高切口質量。在切割超過8mm的有機玻璃時,應更換大規格的鏡片。(注:在切割有機玻璃時操作人員不可離开,切割時可能會有火焰。)   2、木材   木材是最常用小型激光配资之家来進行加工的。淺色的木材象桦木、櫻桃木或者楓木能很好地被激光氣化,因而比較合适雕刻。每種木材都有處身的特點,有的致密一些,如硬木,在雕刻或切割時就要用更大的激光功率。

1. Acrylic (an organic glass)
       Yakeli most commonly used industry is in advertising industry. Because of its important plasticity polymer material, it has good transparency, chemical stability and weathering, easy dyeing, easy to process, beautiful appearance. For some traditional practitioners, the cost of using small laser engraving machines is relatively low relative to manual labor to meet customer needs and reduce costs. In general, the plexiglass USES the back carving method, which means that the front sculpture and the rear view, which makes the finished product more stereoscopic. In the back carving, please first mirror image, and the engraving speed is fast, the power is low. The organic glass is relatively easy to cut and should be used to improve the quality of the incision. When cutting more than 8mm of plexiglass, large size lenses should be replaced. (note: the operator must not leave when cutting plexiglass, and may have flame when cutting.) 2. Wood timber is the most commonly used small laser engraving machine for processing. Light colored wood like birch, cherry or maple can be easily gasified by lasers, and thus suitable for carving. Each type of wood has its own characteristics, some of which are dense, such as hardwood, which are used for larger laser power when carving or cutting.

2.小型激光配资之家切割木材
       深度一般不深,在5mm以内,这是因为激光的功率較小,如放慢速度切割會造成木材的燃燒。具體操作時可嘗試一下使用大規格鏡片,并采用重複切割的方法。

2. Small laser engraving machine cut wood.
      The depth is generally not deep, within 5mm, because the laser is less powerful, such as slow cutting can cause wood burning. For specific operations, try using large size lenses and repeat cutting.

   3、密度貼面闆
      就是我們常用于做标牌襯闆的那種木托闆。材料为高密度闆,表面貼有薄薄的木紋。激光配资之家可以在这尖材料廠上進行雕刻,但雕刻出的圖案顔色不均勻且發黑,一般要着色。通常情況下你可以通過学习适當的設計,使用0.5mm的雙色闆進行鑲嵌以獲得更好的效果。雕刻結束後,使用濕布清潔密度闆表面即可。

3. Density patch panel.
      It's the kind of wooden pallet that we use to make a signboard. The material is a high density board with a thin veneer on the surface. The laser engraving machine can be carved on this point material factory, but the color of the engraving is uneven and black, usually colored. Usually you can get better results by learning the appropriate design and using a 0.5mm double-color board. After the sculpture is finished, use the wet cloth to clean the surface of the density board.

 4、雙色闆  

      雙色闆是一種由兩層或兩層以上顔色複合構成的一種专用于雕刻的工程塑料,由于雙色闆具有ABS本身的抗沖擊性、耐熱性和耐低溫性,同時,也具備易於加工、成品尺寸穩定等特性,近年来更是倍受建築裝潢裝飾、展覽展示、廣告制作、标识制作等行业廣泛應用。其規格一般为600*1200mm,亦有少量品牌規格为600*900mm。使用小型激光配资之家雕刻的效果會非常好,有很明顯的對比和清晰的邊緣。注意速度不要太慢,不要一次切透,就分三、四次進行,这樣切割出的材料邊緣平整,沒有熔化痕迹。雕刻加工時功率應恰倒好處,不宜過大,以避免熔化痕迹出現。

4, double-color board

      double-color board is composed of two or more than two layers of a special color combinations on the carved engineering plastics, due to the double color plate with the ABS itself impact resistance, heat resistance and low temperature resistance, and at the same time, also has easy processing, the finished product size stability characteristics, particularly in recent years, building decoration decoration, exhibition, advertising production, the production of logo, and other industries widely used. Its specifications are generally 600*1200mm, and a small number of brand specifications are 600*900mm. The effect of using a small laser engraving machine can be very good, with clear contrast and sharp edges. Don't be too slow, don't cut it all at once, and do it three or four times, so the edges of the cut are smooth and there is no trace of melting. When carving, the power should be exactly the benefit, not too large, to avoid melting marks.

5、鍍漆銅闆 
       通常情況下,銅是不能被激光雕刻的。但現在有一種材料其表面附着一層特殊的漆膜,激光可以将表面的漆膜完全汽化,而後露出底層銅闆。通常制造商會在鍍漆前将銅闆抛光或做特殊處理,以使雕刻後現露出的區域能有足夠的光潔度,且能将其保存很長時間。如銅表面未做處理,使用小型激光配资之家後需再做一次保護膜,以免時間一長發生氧化,表面變污。

5. Coated copper plate.
       Normally, copper cannot be sculpted by laser. But now there is a material that has a special coat of paint on its surface. The laser can completely vaporize the paint film on the surface, and then reveal the underlying copper plate. Usually the manufacturer will polish the copper plate or make special treatment before the plating, so that the area exposed after the carving can have enough finish and can keep it for a long time. If the copper surface has not been treated, use a small laser engraving machine to do a protective film once again, so as to avoid oxidation and stain on the surface.