配资之家歡迎您的到来!

Banner
首頁 > 新聞 > 内容

新聞詳情

News detail

木門配资之家价格及幅面大小

編輯:博牛宝沪深策略時間:2018-05-16

木門配资之家的价格是根據配资之家的配置高低来決定的。


The price of wooden door engraving machine is determined according to the configuration of engraving machine.


木門配资之家并不是萬能的,配资之家并不是可以幹所有的活。配资之家廠家把配资之家分为各種規格型号,为的就是應付各種不同的加工任務。例如您買一台模具級的配资之家去雕雙色闆,或買一台大型配资之家来雕印章,这都造成巨大的浪费,而且也不會獲得好的效果。同樣您買一台廣告級的配资之家去做模具,則可能根本不能勝任。所以您在購機前,一定要向銷售人員表示清楚您要加工的東西,包括加工工件的大小,材料的材質,材料的厚度、重量、最終雕刻效果及要求等等。


Wooden door engraving machine is not omnipotent, engraving machine is not able to do all the work. The engraving machine is divided into various specifications and models to deal with various processing tasks. For example, if you buy a mold carving machine to carve a double color board, or buy a large engraving machine to carve the seal, it will cause huge waste and will not get good results. You can also buy an AD - level engraving machine to make the mold, which may not be competent at all. Before upgrade, so you must be clear to the sales staff said you to processing, including the size of the machining, material is qualitative, the thickness of the material, weight, finally carving effect and requirements, and so on.


一:木門配资之家幅面的大小


One: the size of wooden door carving machine.


看木門配资之家幅面的大小。應根據业務需求和财務狀況選擇,木門配资之家的型号以及功率不同,价位和适用方面也不一樣。一般小幅面的配资之家有600毫米×600毫米與600毫米×900毫米兩種,進料寬度一般都是700毫米。如果是需要雕刻雙色闆的話,小幅面配资之家是最基本的應用,其接納性很好。如果再小一點,配资之家价格與其相差不多,但雕刻雙色闆時還需要裁闆,麻煩不說還會造成不必要的浪费。大幅面的配资之家有1200毫米×1200毫米、2000毫米×1500毫米、1500毫米×2400毫米和2400毫米×3000毫米四種,这些機型的配资之家進科寬度都超過1350mm,現在市面上的有機玻璃和PVC闆的尺寸都是1300mm×2400mm,所以这幾款機型對需求大幅面配资之家的客户比較适合。


Look at the size of the wooden door carving machine. Depending on the business needs and financial situation, the model and power of the wooden door engraving machine are different in terms of price and application. In general, the engraving machine has 600 mm x 600 mm and 600 mm x 900 mm, and the feed width is usually 700 mm. If it is necessary to carve a double color board, the small size engraving machine is the most basic application, and its acceptability is very good. If you are a little bit smaller, the engraving machine price is similar to that, but you still need to cut the board when carving the double color board, and it will cause unnecessary waste. Large-format engraving machine with 1200 mm * 1200 mm, 2000 mm * 1200 mm, 1500 mm * 2400 mm and 2400 mm * 3000 mm four, the carving machine feeding width of these models are more than 1350 mm, now on the market of organic glass and the size of the PVC board is 1300 mm * 2400 mm, so these a few model on the demand side carving machine is suitable for the customer.


二:木門配资之家導軌


Two: wooden door carving machine guide.


要注意木門配资之家的導軌。大幅面配资之家一定要采用加寬的進口的方型導軌,其負載能力和精度保持能力是圓型導軌的30倍以上,保證了配资之家的高質高速。


Pay attention to the guide of wooden door carving machine. The large surface engraving machine must adopt the square guide rail with wide inlet, its load capacity and precision maintaining capacity is more than 30 times that of the circular guide, ensuring the high quality and high speed of the engraving machine.