配资之家歡迎您的到来!

Banner
首頁 > 行业知识 > 内容

行业知识

IndustryDetail

木門配资之家各部件簡介

編輯:博牛宝沪深策略時間:2018-05-16

一:木門配资之家精度問題:


1. Precision of wooden door engraving machine:


通常,小幅面機雕刻1mm漢字,或大幅面配资之家刻1.5mm小字,在放大鏡下都要看得非常清晰。


Usually, small size machine engraving 1mm Chinese characters, or large engraving machine engraved 1.5mm small words, under the magnifying glass to see very clear.


二:主軸電機及功率


Two: spindle motor and power.


主軸電機是電腦配资之家的重要組成部件,其功能對電腦配资之家整機的功能有着至關重要的影響。加工主軸一般分为兩類:精密加工主軸和大功率堵截主軸。


Spindle motor is an important component of computer engraving machine, and its function has a vital influence on the function of computer engraving machine. The processing main shaft is generally divided into two types: precision machining spindle and high power block spindle.


1、精密加工主軸的特點是低噪音、高轉速、高度,合适加工格外精密的工件,如印章、銘牌、胸牌禮物等。此類電機一般为高速變頻電機,功率較小,般在250W以下。缺陷是堵截厚的资料的才能較差,不合堵截較厚的资料。


1. The features of precision machining spindle are low noise, high speed and height, suitable for the processing of extremely precise workpieces, such as seals, nameplates, and chest gifts. This kind of motor is generally high speed frequency conversion motor, the power is small, as below 250W. Defect is the ability to block thick data is poor, do not block the thicker data.


2、大功率堵截主軸,首要用于堵截、大功率刻,特點是功率大,切开才能強,格外合适割宇、三立體字,當然也能夠制造胸牌、銘牌、印章等。此類大功率主軸依據電機的特性一般可分为無刷頻高速溝通電機和有刷溝通電機,其首要區别是:


2, high-power block the spindle, first used in the block, high power, is characterized by large power, cutting ability is strong, especially suitable to cut yu, three stereoscopic word, of course, also can be made the breastpiece, nameplate, seals, etc. According to the characteristics of the motor, such large power spindle can be divided into brushless high-speed communication motor and brush communication motor. The first difference is:


A、無刷變頻電機轉速高,變速規模为70060000轉/分鐘,而一般有刷溝通電機最高轉速不超24000轉/分鐘;


A, brushless frequency conversion motor has high speed, and the variable speed is 70060000 RPM, while the maximum speed of brush communication motor is not more than 24000 RPM;


B、無刷變頻電機旋轉精度高,磨損小,噪音低,作噪音大大低于有刷溝通電機;


B. Brushless frequency conversion motor has high rotation precision, small wear and low noise, and makes noise greatly lower than the brush communication motor;


C、無刷變頻電機堵轉特性好,因为變頻器上有特的限流電路,短時間的堵轉不會焚毀電機,而有刷溝通機在超負荷運轉或堵轉時會很快冒煙焚毀,且不行修正;


C, locked-rotor characteristic frequency conversion brushless motor is good, because the frequency converter with current limiting circuit, locked-rotor not burning motor for a short period of time, and a brush communication machine in the overload operation or locked-rotor decay quickly smoke, and no correction;


D、無刷變頻電機選用變頻操控技能調速,是专业級商品,壽數長,廠家供給1年免费包換,今後還能夠经過替換高速軸承對電機進行保護,而有刷溝通電機因为使用電劄壽數大約在300小時就得替換馬达或電機碳刷,所以碳刷溝通電機一般一天也不保修。


D, selection of frequency conversion brushless motor variable frequency speed regulation control skills, is a professional commodity, taking long, manufacturers supply 1 year free replacement, the future will also be able to pass to replace high speed bearing for motor protection, communication and a brush motor because of using electricity Zagreb life spans about 300 hours will have to replace carbon brush motor or motor, so the carbon brush motor generally does not guarantee a day communication.


三:吸塵裝置


3: dust collection device.


木門配资之家在工作時會産生大量的粉塵,配资之家應該設計有良好的吸塵裝置。


Wooden door engraving machine will produce a lot of dust when working. The engraving machine should be designed with good dust collecting device.


四:吸附固定台面


Four: adsorption fixed table.


木門配资之家在工作過程中雕刻速度非常快,力量非常大,普通夾具的固定方式很難固定,所以選購木工配资之家都應配備真空吸附平台,用以固定雕刻材料。


Wood engraving machine carving very fast in the process of work, the strength is very large, common fixture fixed way hard to fixed, so the choose and buy woodworking engraving machine should be equipped with a vacuum adsorption platform, to a fixed carving materials.